High Precision 2F 3F 4F Tungsten Carbide End Mill Cutters
Discription:
An end milling bit is an industrial rotating cutting tool that can
be used for milling operations.
They are also referred to as "milling bits".
Center cutting end mills can be used for plunging operations (axial
milling), and can also be used in side milling operations (radial
milling).
Non-center cutting end mills may only be used in side milling
applications.
The most common material used for end mills is tungsten carbide.
We are professional munufaturer and supplier for a ranges of high
performance solid carbide end mills, drills, reamers in ultra micro
grain tungsten carbide materials.
Applications: for Aluminum,Copper,Iron,Ordinary Steel,Heat
Resistant Steel,Stainless Steel,Ti Alloy.
Specifications of corner radius head End Mills:
| Description | D | Lc | L | d | R | z |
| Standard Length | 1.0~6.0 | 3.0~16.0 | 50 | 4~6 | 0.0~2.0 | 2 |
| 8.0 | 20 | 60 | 8 | 0.3~2.0 | 2 |
| 10.0~12.0 | 25~30 | 75 | 10~12 | 0.3~3.0 | 2 |
| 16.0 | 36 | 100 | 16 | 1.0~3.0 | 2 |
| With Long Shank Length | 6.0 | 15 | 785 | 6 | 0.5~1.5 | 2 |
| 8.0~12.0 | 20~30 | 100 | 8~12 | 0.5~2.0 | 2 |
| 16.0 | 36 | 150 | 16 | 0.5~2.0 | 2 |
| Standard Length | 2.0~6.0 | 6.0~16.0 | 50 | 4~6 | 0.1~0.5 | 3 |
| 8.0 | 20 | 60 | 8 | 0.5~1.0 | 3 |
| 10.0~12.0 | 25.0~30.0 | 75 | 10~12 | 0.5~2.0 | 3 |
| 16.0~20.0 | 16.0~45 | 100 | 16~20 | 0.5~4.0 | 3 |
| Standard Length | 1.0~6.0 | 3.0~16.0 | 50 | 4~6 | 0.0~2.0 | 4 |
| 8.0 | 20 | 60 | 8 | 0.3~2.0 | 4 |
| 10.0~12.0 | 25~30 | 75 | 10~12 | 0.3~3.0 | 4 |
| 16.0 | 36 | 100 | 16 | 1.0~3.0 | 4 |
| With Long Shank Length | 6.0 | 15 | 785 | 6 | 0.5~1.5 | 4 |
| 8.0~12.0 | 20~30 | 100 | 8~12 | 0.5~2.0 | 4 |
| 16.0 | 36 | 150 | 16 | 0.5~2.0 | 4 |
Coating:
| Coating Sheet |
| Coating Type | TiAIN | ALTiN | TiSiN | Nano |
| Hardness(HV) | 2800 | 3200 | 3600 | 42(GPA) |
| Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
| Oxidation Temp(°) | 800 | 900 | 1000 | 1200 |
| Friction Coeffient | 0.3 | 0.3 | 0.45 | 0.4 |
| Color | Violet | Black | Copper | Blue |
TiAIN
A special multilayer coating for edge retention and corrosion
resistance when used on a wide range of materials including iron
based, hardened steels, and stainless steels. Typically TiAIN is
used in applications with lower cutting speeds than TiSiN and ALTiN
but often improves the tool's lifetime by a factor of three or
more.
ALTiN
A general purpose coating that offers improved wear resistance to
abrasive, adhesive, or difficult to machine materials such as cast
iron, aluminum alloys, steels, copper and more. This is a common
used substitute when the advantages of TiAIN cannot be used, as in
applications that cannot generate the speeds and feeds required for
higher cutting temperatures. ALTiN is harder and more impact
resistant than TiAIN and can improve tool life.
TiSiN
This is a high performance coating for milling, tapping and
drilling in stainless steels, carbon steels, alloy steels, and cast
iron. This coating is extremely heat resistant and can be used with
or without coolant. It is exceptional in difficult to machine
materials where adhesive wear is particularly high and can be run
at much higher speeds and feeds than all other coatings.
