TiAIN Coating Solid Tungsten Carbide End Mills for Cast Iron
Hardened Steel
Features:
We are professional munufaturer and supplier for a ranges of high
performance solid carbide end mills, drills, reamers in ultra micro
grain tungsten carbide materials.
Applications:
Aluminum, Copper, Iron, Ordinary Steel, Heat Resistant Steel,
Stainless Steel, Ti Alloy Milling.
Cutting material is an important consideration when selecting an
end mill. Carbide End Mills can run at higher speeds than
high-speed or alloy steel, it is also more resistant to wear and
can be used at very high working temperatures. Alloy Steel End
Mills resists abrasion and high working temperatures, and has
higher feed rates than High-speed Steel. High-speed Steel End Mills
are compatible with a variety of materials and is typically used
for less demanding jobs. Tungsten carbide material is the better
choice in cutting industry.
An End Mill’s end cut type can either be center cutting or
non-center cutting. Center-cutting end mills can create
three-dimensional shapes and profiles, and make plunge cuts similar
to a drill bit. All Carbide End Mills are center cutting.
Non-center-cutting End Mills are suitable for peripheral milling
and finishing, but cannot be used to make plunge cuts. Tungsten
Carbide End Mills will specify if they are center or non-center
cutting.
Specifications of corner radius head End Mills:
| Description | D | Lc | L | d | R | z |
| Standard Length | 1.0~6.0 | 3.0~16.0 | 50 | 4~6 | 0.0~2.0 | 2 |
| 8.0 | 20 | 60 | 8 | 0.3~2.0 | 2 |
| 10.0~12.0 | 25~30 | 75 | 10~12 | 0.3~3.0 | 2 |
| 16.0 | 36 | 100 | 16 | 1.0~3.0 | 2 |
| With Long Shank Length | 6.0 | 15 | 785 | 6 | 0.5~1.5 | 2 |
| 8.0~12.0 | 20~30 | 100 | 8~12 | 0.5~2.0 | 2 |
| 16.0 | 36 | 150 | 16 | 0.5~2.0 | 2 |
| Standard Length | 2.0~6.0 | 6.0~16.0 | 50 | 4~6 | 0.1~0.5 | 3 |
| 8.0 | 20 | 60 | 8 | 0.5~1.0 | 3 |
| 10.0~12.0 | 25.0~30.0 | 75 | 10~12 | 0.5~2.0 | 3 |
| 16.0~20.0 | 16.0~45 | 100 | 16~20 | 0.5~4.0 | 3 |
| Standard Length | 1.0~6.0 | 3.0~16.0 | 50 | 4~6 | 0.0~2.0 | 4 |
| 8.0 | 20 | 60 | 8 | 0.3~2.0 | 4 |
| 10.0~12.0 | 25~30 | 75 | 10~12 | 0.3~3.0 | 4 |
| 16.0 | 36 | 100 | 16 | 1.0~3.0 | 4 |
| With Long Shank Length | 6.0 | 15 | 785 | 6 | 0.5~1.5 | 4 |
| 8.0~12.0 | 20~30 | 100 | 8~12 | 0.5~2.0 | 4 |
| 16.0 | 36 | 150 | 16 | 0.5~2.0 | 4 |
Coating Introductions:
| Coating Sheet |
| Coating Type | TiAIN | ALTiN | TiSiN | Nano |
| Hardness(HV) | 2800 | 3200 | 3600 | 42(GPA) |
| Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
| Oxidation Temp(°) | 800 | 900 | 1000 | 1200 |
| Friction Coeffient | 0.3 | 0.3 | 0.45 | 0.4 |
| Color | Violet | Black | Copper | Blue |
TiAIN
A special multilayer coating for edge retention and corrosion
resistance when used on a wide range of materials including iron
based, hardened steels, and stainless steels. Typically TiAIN is
used in applications with lower cutting speeds than TiSiN and ALTiN
but often improves the tool's lifetime by a factor of three or
more.
ALTiN
A general purpose coating that offers improved wear resistance to
abrasive, adhesive, or difficult to machine materials such as cast
iron, aluminum alloys, steels, copper and more. This is a common
used substitute when the advantages of TiAIN cannot be used, as in
applications that cannot generate the speeds and feeds required for
higher cutting temperatures. ALTiN is harder and more impact
resistant than TiAIN and can improve tool life.
TiSiN
This is a high performance coating for milling, tapping and
drilling in stainless steels, carbon steels, alloy steels, and cast
iron. This coating is extremely heat resistant and can be used with
or without coolant. It is exceptional in difficult to machine
materials where adhesive wear is particularly high and can be run
at much higher speeds and feeds than all other coatings.
